联系我们

名称:保定市鑫鑫井盖模具厂

电话:0312-8103011

手机:13403121185

联系人:吕经理

地址:保定东郊工业园区

新闻动态
要对路缘石模具进行护理
要对路缘石模具进行护理,就要对几个重要零部件进行重点跟踪检测:顶出、导向部件的作用是确保水渠盖板模具开合运动及塑件顶出,若其中任何部位因损伤而卡住,将导致停产,故应经常保持模具顶针、导柱的润滑,并定期检查顶针、导框格护坡模具 箱体护坡模具 华尔街铜牛 电阻柜 接地电阻柜 电缆保护接地箱 隔离墩模具 化粪池模具柱等是否发生变形及表面损伤,一经发现,要及时更换。
To care for the road edge stone mold, we should focus on several important parts and parts. The function of the top out and guiding parts is to ensure the opening and closing of the die and the top out of the plastic parts. If any part is stuck because of the damage, it will cause the stop of production, so it should always keep the lubrication of the mold top needle and the guide column. It is necessary to detect the deformation and surface damage of thimble, guide pin and so on.

随着生产时间持续,冷却道易沉积水垢、锈蚀、淤泥及水藻等,使冷却流道截面变小,冷却通道变窄,大大降低冷却液与铁路公路盖板模具之间的热交换率,增加企业生产成本,因此对流道的清理应引起重视;对于热流道模具而言,加热及控制系统的保养有利于防止生产故障的发生,故而尤为重要。
With the continuous production time, the cooling channel easily deposited scale, rust, silt and algae, which made the cooling channel cross section smaller and the cooling channel narrowed, greatly reducing the heat exchange rate between the cooling solution and the railway highway cover die, and increasing the production cost of the enterprise. Therefore, the clear principle of the flow passage should be paid attention to. In terms of heating and control system maintenance, it is very important to prevent production failures.

联系方式

  1. 名称:保定市鑫鑫井盖模具厂
  2. 电话:0312-8103011
  3. 手机:13403121185
  4. 联系人:吕经理
  5. 地址:保定东郊工业园区

版权 © 保定市井盖模具厂 网址:www.jinggaimoju.com.cn  推荐:井盖钢模具,防撞墙模板,U型渠模具,风电基础模板,护坡塑料模具