联系我们

名称:保定市井盖模具厂

手机:13313028229

新闻动态
模具零件裹面的组成
模具零件裹面的组成
Composition of coating surface of mold parts
组成模具的零件形状虽然各异,但构成每个零件的基本表面可概括为3种。
Although the shapes of the parts that make up the mold are different, the basic surfaces that make up each part can be summarized as three kinds.
(1)回转面零件的外圆面、内圆面、圆锥面等。
(1) Outer circular surface, inner circular surface, conical surface, etc. of revolving surface parts.
(2)平面板的表面和框格护坡模具 箱体护坡模具 华尔街铜牛 电阻柜 接地电阻柜 电缆保护接地箱 隔离墩模具 化粪池模具轴的端面等。
(2) The surface of the plane plate and the end face of the shaft, etc.
(3)曲面成形零件的二维曲面和三维曲面等。
(3) The two-dimensional surface and three-dimensional surface of surface forming parts.
模具零件成形的实质就是解决这3种基本表面的加工问题。对于回转面和平面通常采用传统的切削加工就可以成形,根据零件表面不同的精度要求和不同的材质可以选取不同的加工方案。
The essence of mold part forming is to solve the processing problems of these three basic surfaces. The rotary surface and plane can be formed by traditional machining. Different machining schemes can be selected according to different accuracy requirements and different materials of the part surface.

联系方式

  1. 名称:保定市井盖模具厂
  2. 手机:13313028229

版权 © 保定市井盖模具厂 网址:www.jinggaimoju.com.cn  推荐:井盖钢模具,防撞墙模板,U型渠模具,风电基础模板,电缆挂钩 收费岛模具 收费岛模具

五金蚀刻机 江苏宝胜电缆 保定网站建设保定网站制作