联系我们

名称:保定市井盖模具厂

手机:13313028229

新闻动态
制作不同的模具
制作不同的模具主需要更换相应的钢模具就可以注塑机成为了整个生产过程中对主要的电缆槽钢模具的制作原来是根据塑料pp高温熔化低温冷却的原理来的我国生产的模具大部分都是电缆槽钢模具。水泥浆不足也会导致气泡产生。浆时不要一次性灌满需要注意的是水泥浆不易过稀。然后再太阳充足的地方晾干,就可以脱模了,生产出来水泥制品。对于模具的保养一定不要放在高温的环境下。
To make different molds, the main need to replace the corresponding steel mold, the injection molding machine has become the main cable channel mold in the whole production process. The production of the main cable channel steel mold was originally based on the principle of high temperature melting and low temperature cooling of plastic pp. most of the molds produced in China are cable channel steel molds. It can also lead to insufficient bubbles in cement slurry. Do not fill the slurry at one time. It should be noted that the cement slurry is not easy to be too thin. Then the sun is enough to dry, you can demould, produce cement products. For mold maintenance must not be placed in a high temperature environment.
电缆槽钢模具使用简单在每一次使用完模具后一定要涂油保养。然后经过震动平台只需要把搅拌好的水泥放入到模具里面。因此在模具生产过程中也限定了电缆槽钢模具的大规模生产采用高性能材料。
The cable channel steel mold is easy to use, and it must be oiled after each use. Then through the vibration platform, only need to put the mixed cement into the mold. Therefore, in the process of mold production, it is also limited to use high-performance materials in large-scale production of cable channel steel mold

联系方式

  1. 名称:保定市井盖模具厂
  2. 手机:13313028229

版权 © 保定市井盖模具厂 网址:www.jinggaimoju.com.cn  推荐:井盖钢模具,防撞墙模板,U型渠模具,风电基础模板,电缆挂钩 收费岛模具 收费岛模具

保定平面设计培训 锻造厂家 北京保洁托管 五金蚀刻机 江苏宝胜电缆 保定网站建设保定网站制作